125,000 sq-ft 5 floor tenant fit-out for government contractor. Included multiple SCIF areas.

30,000 sq-ft, high pressure, high end, fast paced fit-out for a tenant under pressure to relocate quickly.

45,000  sq-ft office fit-out for Baltimore based technology firm.

The Under Armour Cascade/Joy Interior Renovations project is a 66,500 square foot fit-out consisting of a renovation to restore and display the existing structure.  All exposed conduit was carefully coordinated with the design team and owner representatives.  The executive level was constructed with a raised floor to house electrical and mechanical distribution for a clean and modern exposed ceiling appearance.  The lighting package consisted of all LED including low voltage and wireless controls through a main lighting control system.  For Hirsch Electric, the project nearly doubled its contract value and though challenging, turnover was completed with a minimal schedule extension.

The National Business Park 400 series campus consists of three office buildings (NBP410, NBP420 and NBP430) totaling 383,000 square feet.  Hirsch Electric completed NBP410/430 with Hitt Contracting and NBP420 with Riparius Construction.  NBP410/430 each contain a 3,000 amp service with four tenant electrical closets.  NBP420 has a 4,000 amp service with five tenant electrical closets.  All elevator lobbies were completely fit-out; mechanical and fire alarm systems were installed throughout.  The plaza lighting, site lighting and ductbank work was performed by the Hirsch Utility division.

To accommodate expansion, Century Engineering constructed a new corporate headquarters building. The LEED Silver building is a 58,000 square foot, four story building with basement. The new building’s architecture made the electrical construction unique and challenging. The intent of the design was to create a working showroom with open space and ceilings to display the building’s systems. Attention to detail was top priority as our work would be exposed for all building employees, clients and visitors to see. Furthermore, the strict guidelines of the United States Green Building Council’s LEED program demanded even tighter constraints and extensive paperwork. A slow start to construction and a firm deadline required the project’s schedule to become accelerated. Ten hour work days including Saturdays became the norm for the final months of the job.

 

The Station Ridge campus consists of three tilt-up office buildings totaling 264,000 square feet.  A fourth building is proposed but not yet constructed.  Hirsch Electric completed the first two buildings with Morgan Keller and the third building with Whiting-Turner.  Each building contains a 3,000 amp service with six tenant electrical closets.  The first floor lobbies were completely fitout; mechanicals and fire alarm system were installed throughout.  All the site lighting and ductbank work was performed by the Hirsch Utility division.  Hirsch was also awarded the Ciena fitout which included 74,000 square feet of building 7301 and the covered walkway between 7301 and 7035.